SYNOTrak LAN-1000 Technical Specifications
Physical Characteristics
 Weight: 340 g
Unit size: 120 * 92 * 37 mm (height)
Case: Aluminum
Environmental Characteristics
Operating Temperature: -10C to +70C
Humidity: 5%-95% non-condensing
Electrical Characteristics
12-24 volts DC, 1.2 watts.
Antenna Connector: SMA female connector
Preamplifier power: 3.2 volt DC, 100 mA for 1575 MHz L1 GPS antenna with SMA male
Ethernet: IEEE 802.3 10Base-T RJ-45 connector
EIA232 Serial: DB-9 female, DCE 3-wire EIA232 (Xmt, Rcv, Gnd) 9600 BPS, 8N1
Four contact inputs: Closure to ground: open =1, closed =0 Voltage to ground: <3v =0
3v-24v =1
GPS Specifications
12 Channel L1 C/A
Position/Velocity: 25m CEP/0.1 m/s without SA
Time Accuracy: 1 us synchronized to GPS time
Max Speed: 515 meters/second
Acceleration: 4g max
Jerk: 20 meters/second3 max
Max Altitude: 18,000 meters
Acquisition Time
Reaquisition <0.1 sec., average
Hot start <8 sec., average
Warm start <38 sec., average
Cold start <48 sec., average
Receiver Sensitivity: -145 dBm
Map Datum: WGS-84
Protocol Messages: NMEA 0183 v2.2
IP Protocol Support
TCP
UDP
ICMP
Telnet
HTTP
| 
Downloads
